Sing.fl. vertical ladder w.bk prot.anod.alu.5.96m | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Vertical ladder on site equip.from below | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Sing.fl. vertical ladder w.bk prot.anod.alu.5.96m | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Vertical ladder on site equip.from below | © Günzburger Steigtechnik GmbH
Vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Order no.: 500100

Single-flight vertical ladder with back protection (construction) anodised aluminium

€ 1,119.00
RRP without VAT
  • Climbing height: 4.76 m
  • Ladder length incl. exit side-rail: 5.96 m
  • Material: Anodised aluminium
  • Order no.: 500100
  • Price: € 1,119.00

Range of application

On buildings for maintenance and cleaning work. For chimneys, specific regulations apply to the attachment and back protection.

Irrespective of the climbing height:

  • Either back protection or fall protection can be used as safety railing (combination not permitted as the rescue of persons is hindered by the back protection)
  • The need for an occupational medical examination for suitability for working at height (e.g. G 41) depends on the risk assessment (e.g. group of persons, total climbing height) of the respective vertical ladder systems
  • A proof of the load-bearing capacity of the underlying surface must be checked and approved for each construction project by a responsible expert for stability
  • We recommend the use of a barrier (safety door). If the exit point is located on traffic routes or at workplaces, a barrier is required
  • The vertical overlap of successive ladder flights must be at least 1,680 mm
  • At unsecured exit points, railings attached to both sides of the vertical ladder or led into the exit level are required
  • Gap at exit step must not be larger than 75 mm
  • Step-on dimension: Distance from entry level to the first rung 100–400 mm. When exiting forwards, the uppermost rung must be at the height of the exit side-rail
  • With vertical ladders with fall protection, there must be at least 800 x 800 mm space available in front of the ladder when climbing through the open space.    
  • These dimensions should also be observed for new installations in the existing system
  • The clearances between the vertical ladder system and the railing must not exceed 120 mm
  • The connection to the fall protection must be established and released from a secured standing position. A secured standing position is, for example, a platform with railing and a secured access
  • For safe gripping of the side-rails, the clearance to adjacent parts around the side-rails must be at least 75 mm (except for components forming part of the vertical ladder system)
Rational modular principle
  • Prefabricated vertical ladders and the possibility of combining them yourself offer the right solution for every project
  • The highly stable fastening technology of the important back protection increases the economic efficiency
  • Each individual component in the modular kit system meets the same quality and efficiency requirements
Multi-fl. vertical ladder on site equipment | © Günzburger Steigtechnik GmbH
Mounting and fastening
  • Thanks to the optimised assembly system, even complex and multiple-flight systems can be assembled with up to 30 percent time savings
  • For ready-made vertical ladders, the appropriate mounting sets are already included, the modular kit system offers numerous fastening options (please also order)
  • Adjustable wall anchors for complex façades or walls with full thermal insulation
Wall anch.U-brack. adj. gal.st. 275-375mm | © Günzburger Steigtechnik GmbH
Various material versions
  • Depending on the application, vertical ladders made of galvanised steel, stainless steel, aluminium and anodised aluminium are available
  • Wall anchors and other mounting materials are available in several materials
  • Robust, durable, efficient
Ladder section 1.96m, 7 rungs | © Günzburger Steigtechnik GmbH
Safely to your destination
  • Convenient platforms for rest breaks or easy changeover with staggered vertical ladders
  • Exits and access ladders for safe ascent and descent
  • Lockable doors, wall anchors and other accessories for different structural conditions
Roof parapet bridge w. safety doors st.st. | © Günzburger Steigtechnik GmbH
Optimum planning
  • Practical planning aids (available as Downloads) with tips for correct planning of vertical ladder systems
  • Planning in close coordination with the client as well as the place and purpose of use
  • Joint project planning
Planning help for vertical ladder systems | © Günzburger Steigtechnik GmbH

All fixed ladders / vertical ladders at a glance:

Comparison table

Climbing height 4.76 m 5.6 m 6.44 m 7.28 m 8.4 m 9.52 m
Ladder length incl. exit side-rail 5.96 m 6.8 m 7.64 m 8.48 m 9.6 m 10.72 m
Material Anodised aluminium Anodised aluminium Anodised aluminium Anodised aluminium Anodised aluminium Anodised aluminium
Order no. 500100 500105 500110 500115 500120 500125
Price € 1,119.00 € 1,396.00 € 1,694.00 € 1,806.00 € 2,095.00 € 2,463.00
Technical changes and price changes reserved. Dimensions and weights are approximate values. Liability for errors and mistakes excluded. Illustrations similar, some illustrations show special equipment. Preview images are representative of a product family and may therefore differ visually from the actual product you are looking for, e.g. in terms of number of steps or material.

Suitable accessories

Similar products